Parts Clear Out
Posted: Wed Feb 16, 2011 6:55 pmI have cleared out some parts that I have no use for anymore.
Want to get rid of them all so I can get out on the track sooner,
details are as follows:
Brake Calipers & Pads:
2x AP CP2279 closed backed 4 spot brake calipers
> 44.5mm pistons & 32.5 mm caliper gate
> Lug type mounting
> Recently overhauled with new seal kit
> Pistons, threads and calipers housing are in good condition
6x AP Lockheed CP2561 2 spot brake calipers
> 38.1 mm pistons & 27.6 mm caliper gate
> Radial type mount
> Recently overhauled and in great condition
A box full of brake pads to suit the 2 and 4 piston calipers
Centre Lock Wheels
Simmons centre lock racing wheels in good condition available in following sizes:
- 16”x10”, three wheels available
- 16”x10¾,” two wheels available
- 16”x12”, two wheels available
All the wheels have a 6” offset,
The wheel centre details are as follows:
- Centre bore hole diameter: 68.5 mm
- PCD of drive bolt holes: 108 mm
- Size of drive bolt holes: 16 mm
- Offset of wheel hub face to spokes 29 mm
These centre lock wheel centres have not been manufactured for many years now.
I am willing to sell wheel centres by themselves if need be and am open to realistic offers.
9 inch diff LSD centre
Ford 9 inch torsen type LSD, was used in the V8 Star Touring car series in Germany.
The centre suits 31 spline axles with a 45 degree spline profile and needs to be used
with a Strange Engineering N1901 aluminium carrier.
Eibach Springs
Range of Eibach coil springs, all in excellent condition with very little use
Spring length Spring inner diameter Spring rate:
- 6 inch 2.25inch 1500 lbs
- 5 inch 2.25inch 1200 lbs
- 4 inch 2.25inch 2000 lbs
- 8 inch 2.50 inch 225 lbs
- 12 inch 2.50 inch 800 lbs
All reasonable offers considered, if you want more info just send me a private message.
Want to get rid of them all so I can get out on the track sooner,
details are as follows:
Brake Calipers & Pads:
2x AP CP2279 closed backed 4 spot brake calipers
> 44.5mm pistons & 32.5 mm caliper gate
> Lug type mounting
> Recently overhauled with new seal kit
> Pistons, threads and calipers housing are in good condition
6x AP Lockheed CP2561 2 spot brake calipers
> 38.1 mm pistons & 27.6 mm caliper gate
> Radial type mount
> Recently overhauled and in great condition
A box full of brake pads to suit the 2 and 4 piston calipers
Centre Lock Wheels
Simmons centre lock racing wheels in good condition available in following sizes:
- 16”x10”, three wheels available
- 16”x10¾,” two wheels available
- 16”x12”, two wheels available
All the wheels have a 6” offset,
The wheel centre details are as follows:
- Centre bore hole diameter: 68.5 mm
- PCD of drive bolt holes: 108 mm
- Size of drive bolt holes: 16 mm
- Offset of wheel hub face to spokes 29 mm
These centre lock wheel centres have not been manufactured for many years now.
I am willing to sell wheel centres by themselves if need be and am open to realistic offers.
9 inch diff LSD centre
Ford 9 inch torsen type LSD, was used in the V8 Star Touring car series in Germany.
The centre suits 31 spline axles with a 45 degree spline profile and needs to be used
with a Strange Engineering N1901 aluminium carrier.
Eibach Springs
Range of Eibach coil springs, all in excellent condition with very little use
Spring length Spring inner diameter Spring rate:
- 6 inch 2.25inch 1500 lbs
- 5 inch 2.25inch 1200 lbs
- 4 inch 2.25inch 2000 lbs
- 8 inch 2.50 inch 225 lbs
- 12 inch 2.50 inch 800 lbs
All reasonable offers considered, if you want more info just send me a private message.