Sports Sedan Forum

Hi guys getting the supra back together and I need a bit of help tracking a drive flange down. The one I have has started to twist. There are no numbers on it anywhere and all I know is it came from Indy car. I'm probably going to make my own but if it can be bought i'd be interested in finding out where from.
The spline is 32 the diameter is 35mm

cheers
Glenn

I'll add a picture of the hub tonight.

Attached files

A small amount of twist is not normally a problem.

Just make sure you keep running them the same direction.

I would have them crack tested and go from there.

toranaracer.

Hi Toranaracer. Yeah unfortunately there are cracks at the end of every spline. Because of the crappy picture you can't see that.

Pictures of the hub.

Attached files